1. What is crusher frame? The frame installed on the foundation of the cone crusher is usually called the crusher frame. 2. The role of the crusher frame a. Fix the adjustment sleeve par and the support sleeve part. b. As the carrier of power transmission, the frame is one of the most important parts of the cone crusher.
The bearing is hot-mounted. Ensure the axial position of the bearing relative to the transmission shaft when you are installing the transmission shaft, and pad a gasket between the base and the flange of the transmission shaft frame.
The gearbox of the cone crusher is an important transmission device and the only way for the cone crusher to obtain a crusher. The main shaft bears a very huge torque when the pinion gearbox is running, while the bearings in the pinion gearbox bear a certain radial force. In order to ensure the normal operation of each transmission element of the gearbox, a dedicated gearbox lubrication channel is designed for the cone crusher. After the cone crusher is turned on, the lubrication system immediately starts to continuously supply oil to the gearbox, and the gearbox can operate normally under sufficient lubrication conditions.
The hydraulic system of the cone crusher is an important part of the cone crusher. The hydraulic system has the advantages of small size, light weight, easy installation, high power density, fast response, and strong controllability. The hydraulic system of the cone crusher realizes the main functions of the crusher through an oil pump, an auxiliary oil pump and two hydraulic motors. The failure of the hydraulic system will directly lead to the failure of the entire transmission system and cause significant losses.
1. What is the cone crusher hopper? A circular funnel installed in the dust cover of the cone crusher is called the feeding hopper. 2. The role of the crusher hopper a. The material maglev adjustment sleeve can be prevented from being worn by the material feeding hopper. b. The feeding hopper can reduce dust pouring into the cavity of the adjustment sleeve and the support sleeve.
Precautions for the use of the cone shaft nut cap of the crusher a. You need to tighten the conical head first when installing the conical head, then tighten the conical head bolts, and perform spot welding on the nut. b. It must be replaced in time when the taper head has random buckle, otherwise it will affect the spindle thread buckle. c. The nut between the conical head and the distribution plate must be tightened, and there should be no looseness to prevent iron over.