During the use of cone crusher, due to the wear of parts in the ore crushing process, the wear will be aggravated, the equipment efficiency will decline and the service life will decline if maintenance is not carried out, so its maintenance is very important. During the maintenance, the following issues should be paid attention to:
1. The ore must be fed in the middle of the distribution plate, and it is not allowed to directly feed the ore into the crushing chamber. Because it is easy to overload the cone crusher and cause uneven wear of the lining plate.
2. The output of cone crusher.
3. Replacement of rolling mortar wall.
4. Replacement of cone crushing wall.
5. The gears engage.
6. Bowl bearings and seals.
7. The cylindrical bushing and frame are the third transitional fit. In order to prevent the rotation of the bushing, zinc alloy is injected into the upper groove of the bushing. When replacing a new bushing, it should be prepared according to the actual size of the frame. Because the conical crusher will inevitably change the fit relationship after a long time of work and loading and unloading. If the clearance is too large, the bushing will break.
8. Conical bushing and spring inspection.
9. The exposed rotating part of cone crusher shall be provided with protective cover.
In the actual production process, we must pay attention to the maintenance of cone crusher, so as to ensure its smooth production process and service life.