The purpose of the crusher bronze bushing:
The bowl-shaped tile of the cone crusher includes a body part, a bowl-shaped frame is arranged under the body part, a bowl-shaped tile is arranged between the bowl-shaped frame and the body part, and the contact surface between the body part and the bowl-shaped tile is a spherical surface, and the body part is provided with a spherical surface. Two spherical rings are arranged on the outer side of the spherical surface, and a sealing ring is also arranged between the body part and the bowl-shaped frame, the upper surface of the sealing ring is in contact with the two spherical rings, and the lower part of the sealing ring is provided with a spring. The utility model adopts the way that the contact surface of the body part and the bowl-shaped tile is spherical, so that the dust will not enter the interior of the utility model when in use, and the contact surface between the upper part of the sealing ring and the two rings of the body and the spherical surface of the body are in the same circle center It will not cause wear when rotating and swinging, adding a certain amount of dry oil grease to prevent dust from entering, so that the contact surface between the bowl tile and the body is kept clean.
The bowl-shaped tile is installed on the bowl-shaped bearing part. It is one of the parts in a mechanical equipment, and its maintenance and maintenance are usually more important. In the process of use, it is necessary to maintain the correct operation mode and carry out regular maintenance and maintenance. So what problems should be paid attention to in the maintenance and maintenance of the bowl-shaped tile?
1. Contact with parts
In normal work, the bowl-shaped tile should be checked regularly, mainly to check whether the contact with the parts is appropriate. The contact between the bowl-shaped tile and the outside should not be too large. It is necessary to regularly check the contact with the parts to ensure that the machine can operate normally.
2. Looseness
In the process of maintenance, it is necessary to see if the bowl-shaped tile is loose. The main thing is to fix it firmly. These problems often attract the attention of many people. If the fixation between the bowl-shaped tile and the bowl-shaped bearing appears. If there is a loose phenomenon, then the bowl-shaped tile should be re-cast in time, and it cannot continue to work in the loose situation. To avoid unnecessary accidents, it is necessary to check it carefully.
3. Treatment of lubricating oil
The lubricating oil treatment of the bowl-shaped tile should also be timely and regularly inspected. A little carelessness will make the wear of the bowl-shaped tile more serious, thereby reducing the smoothness of the bowl surface, which may occur. Some cracks must be replaced and dealt with at this time.
4. Degree of cooperation
When the mechanical equipment is in operation, the matching degree between the bowl-shaped tile and the bowl-shaped bearing part is better, and they cooperate with each other, so that the tightness is higher and the operation efficiency is higher. If the tightness is not high during operation, it is easy to cause collision, poor internal contact and other undesirable phenomena. These situations should be paid attention to during operation. In addition, it is necessary to prevent some sundries or dust from entering the interior of the machine, which will increase the wear rate and lower the lubrication effect, so keep the environment clean and tidy during operation.
Welcome to inquiry from Shenyang Shilong Mechanical. Whatsapp: +86 13998283590