symons cone crusher adjustment ring is the key equipment in many industries such as mineral processing, coal, chemical industry and construction. In the fine crushing section of the beneficiation workshop, cone crushers are often used as crushing machinery. When overhauling the crusher, or replacing the big bevel gear and the copper sleeve, the symons cone crusher adjustment ring needs to be removed. So, is there any way to quickly disassemble the adjustment ring of the symons cone crusher?
How to realize the quick disassembly and installation of the adjustment ring of the symons cone crusher adjustment ring ?
Take the process of using three cone crushers in the fine crushing section of the beneficiation workshop as an example. The installation heights of the adjustment rings of the three cone crushers are the same, and they are usually disassembled by pushing the hydraulic cylinder to rotate the cone crsuher adjustment ring. It is necessary to move the handle of the hydraulic valve when disassembling the adjusting ring to realize the expansion and contraction of the pushing head. This method is time-consuming, labor-intensive and uneconomical.
When using the quick disassembly device to disassemble and assemble the spring symons series cone crusher adjusting ring, firstly wind the steel wire rope along the saw-shaped spiral groove of the adjusting ring, and then start the winch. It only takes 1.1 minutes to pull the adjustment ring with a winch to rotate 1 circle, and it takes about 10 minutes to remove the adjustment ring, which saves more than 2 hours of time than using a push hydraulic cylinder, which greatly improves the working efficiency of the crusher. A device worthy of promotion and application.